JSControls Technology

JSC200L

Application

The JSC200L is a Multi-Functional controller that supports 4 universal inputs which can be individually configured to receive volt free Digital Input, 0~10VDC, 0-5VDC, or 4-20mA Analog Input and NTC10KΩ.

It also supports six 24VAC triac outputs and 2 number of 0-10VDC or 4-20mA Analog Outputs.

The controller uses the latest generation Neuron FT5000 processor for communication and controls with firmware tailored to meet the LonMark Standards

Modbus interface makes it communicates with any Modbus device or DDC. It can be a Gateway between Modbus and LonWorks.

Free programming features make it meet any requirements in BMS.

It’s applications includes but not limited VAV controller, FCU controller, General Purpose Controller, Venturi Valve controller, Modbus-LonWorks Gateway, AHU-VAV Variable Static Pressure Regulator, Digital Monitor Controller, etc.

Provide customized program for special project requirement service.

•    Controller for DC Brushless Fan Coil Units or 3 Speed Fan Coil Units

•    VAV Controller

•    Venturi Valve Controller

•    Modbus-LonWorks Gateway

•    Free control logic programming

•    Suited for use in hotels, offices, hospital and other areas requiring DDC in BMS

Features

Ÿ   Communication Standard

ISO/IEC 14908.1 and 14908.2,  ANSI 709.1 and709.3

Free Topology, TP/FT-10, 78Kbps

Ÿ   FT5000 chip set

Ÿ   Max 250 Network Variables

Ÿ   RS-485 Communication Port for Modbus interface

Ÿ   Operates in either Networked or Standalone modes (selectable)

Ÿ   Designed for using with 2-pipes or 4-pipes water FCU systems

Ÿ   For DCBL Fan Coil Unit, DDC uses AO to achieve step-less control of fan speed, enabling greater energy efficiency

Ÿ   For 3 Speed Fan Coil Units, DDC uses 3 DO to control high, medium, low speeds

Ÿ   Work with Modbus Thermostat JSC-T928.

Ÿ   Free control logic programming to meet any control requirement

Ÿ   Able to customized program for BMS project

Ÿ   Gateway between Modbus and LonWorks